Self Levelling Primer P565-5601/5/7
Product Description
Self Levelling Primer, P565-560X, is based on the latest technical developments in primer technology, and should be used where optimization of the repair process is a key requirement.
This product can be applied direct to Electrocoat, and can be topcoated up to three days later without the need for primer sanding.
Excellent application combined with the self levelling properties provide a high quality finish, equivalent to that provided by a traditional sanded primer, and delivers a non-sanding route to optimize the whole repair process.
Product Code: P565-5601 / P565-5605 / P565-5607
Especially valuable for new panel work, Self Levelling Primer allows booth utilization to be optimized by providing the opportunity for priming new panels in advance in small batches, ready for topcoating at the same time as the vehicle.
The strong adhesion and anti-corrosion properties of Self Levelling Primer, P565-560X allows small rub through areas of bare metal to be primed without the need for an Epoxy Primer, again saving a step in the repair process.
If large or exposed areas of bare metal are to be painted use 2K Epoxy Primer underneath.
Do not use an Etch Primer underneath Self Levelling Primer.
The addition of P852-1670 Plastic additive for primer will allow new bare TPO, PP/EPDM panels to be
painted with Self Levelling Primer. This Blend can also be applied to E-coat and other recommended substrates.
Self levelling primer, although intended as Wet-on-Wet primer CAN be dry sanded with grid 800 to 1000 in case defects need to be removed or a really high appearance expectation needs to be met.